ENTES Elektronik

 Power Quality and Energy

MPR-1 series

Power Network Analyser

      - Model: MPR-16S-21

      - Din rail type, DIN4

      - 51st Harmonics

      - RS485 communication

      - Digital input, 2 points

      - Digital output, 2 points

      - Temperature input, 1 point

      - Relay output, 1 point

      - CT ratio, X5-X1

      - Log record, 4MB

      - 95-270VAC/DC

      - 12-50VDC (MPR-16S-21-D)

MPR-2 series

Power Network Analyser

      - Model: MPR-27S-23

      - Din rail type, DIN4

      - Demand, max, Min

      - THD-V, THD-U, THD-I

      - 51st Harmonics

      - Voltage/current unbalances

      - RS485 communication

      - Digital input, 2 points

      - Digital output, 2 points

      - Analog output, 1 point

      - CT ratio, X5-X1

      - Log record, 4MB

      - 95-270VAC/DC

MPR-3 series

Power Network Analyser

      - Model: MPR-34S-11-PM

      - Dimensions, 72x72x50mm

      - Demand, max, Min

      - THD-V, THD-U, THD-I

      - RS485 communication

      - Digital input, 1 point

      - Digital output, 1 point

      - Pulse counter, 1 point

      - Operating hours

      - CT ratio, X5-X1, X/333 mV

      - Event recording, 1MB

     - Plug & meter

      - 95-270VAC/DC

MPR-4 series

Power Network Analyser

      - Model: MPR-47SE-0.5

      - Dimensions, 72x72x45mm

     - Active energy class 0.5

      - Demand, max, Min

     - 4th current input

      - THD-V, THD-U, THD-I

      - RS485, Ethernet

      - Digital in/output, module type

      - Analog output, module type

      - Relay output, module type

      - Operating hours

      - CT ratio, X5-X1

      - Log/Event recording, 16MB

     - 95-270VAC/DC

MPR-6 series

Power Network Analyser

      - Model: MPR-60S-41

      - Dimensions, 96x96x80mm

      - Demand, max, Min

      - THD-V, THD-I

      - 31th Hamonices

      - RS485 communication

      - Digital output, 2 points

      - Analog output, 0/4-20mA,  1 pt

      - Relay output, 2 points

      - Pulse output, 1 point

      - Log recording, 1MB

     - Clock (RCT), Alarm

      - 85-265VAC/DC

 3-Phase Multimeters       

EMM-04CS

3-Phase Multimeter, Slim

      - 3-Phase Voltage/current

      - Power factor, Frequency

      - Neutral current, Demand

      - Max/Min value

      - Alarm contact

      - Under/Over V/F protection

      - Under/Over Hz protection

      - Phase sequence protection

      - RS485 communication

      - CT ratio, .../5A

      - Resetable/Total run hour

      - 100-270VAC/DC

     - Dimension, 96x96x45mm

                              (Slim design)

EMM-04S

3-Phase Multimeter, Slim

       - 3-Phase Voltage/current

      - Power factor, Frequency

      - Neutral current, Demand

      - Max/Min value

      - RS485 communication

      - CT ratio, .../5A

      - Resetable/Total run hour

      - 100-270VAC/DC

     - Dimension, 96x96x45mm

                              (Slim design)

EPM-06CS-96

3-Phase Multimeter, 96mm

      - 3-Phase Voltage/current

      - Power factor, Frequency

      - Neutral current, Demand

      - Max/Min value

      - Alarm contact

      - Under/Over V/F protection

      - Under/Over Hz protection

      - Phase sequence protection

      - RS485 communication

      - CT ratio, .../5A

      - Resetable/Total run hour

      - 45-265VAC/DC (option)

     - Dimension, 96x96x80mm

EPM-04CS-96

3-Phase Multimeter, 96mm

      - 3-Phase Voltage/current

      - Frequency

      - Neutral current, Demand

      - Max/Min value

      - CT ratio, .../5A

      - 45-265VAC/DC (option)

     - Dimension, 96x96x80mm

EPM-06CS-DIN

3-Phase Multimeter,  DIN

      - 3-Phase Voltage/current

      - Power factor, Frequency

      - Neutral current, Demand

      - Max/Min value

      - Alarm contact

      - Under/Over V/F protection

      - Under/Over Hz protection

      - Phase sequence protection

      - RS485 communication

      - CT ratio, .../5A

      - Resetable/Total run hour

     - DIN rail type

 Power Factor Controllers

RGP-9S

Power Factor Controller

       - 3-Phase

       - Shunt reactor

       - Control, 9 steps

       - 3-Phase, 3 x CT

       - 1-Phase capacitor

       - 3-Phase capacitor

       - TDH protection

       - Dual target cosØ

       - Modbus / RS485

       - Password protection

       - 31th Hamonices

      - Dimension, 144x144x60mm

RGP-12S

Power Factor Controller

       - 3-Phase

       - Shunt reactor

       - Control, 12 steps

       - 3-Phase, 3 x CT

       - 1-Phase capacitor

       - 3-Phase capacitor

       - TDH protection

       - Dual target cosØ

       - Modbus / RS485

       - Password protection

       - 31th Hamonices

      - Dimension, 144x144x60mm

RGSR-24S (SVC)

Power Factor Controller

       - 3-Phase

       - Shunt reactor

       - Control steps, 20 + SVC

      - Smart switching

      - 2nd current transformer

       - 3-Phase, 3 x CT

       - 1-Phase capacitor

       - 3-Phase capacitor

       - TDH protection

       - Dual target cosØ

       - Modbus / RS485

       - Automatic setup

       - Password protection

       - 31th Hamonices

      - Dimension, 144x144x60mm

RG3-12e

Power Factor Controller

       - 3-Phase

       - Control, 12 steps

      - Smart switching

       - 3-Phase, 3 x CT

       - 1-Phase capacitor

       - 3-Phase capacitor

       - TDH protection

       - Single target cosØ

       - Password protection

      - Automatic setup

      - Dimension, 144x144x80mm

New face of PFC

Thanks to patented Smiley Mode, ENTES RGP new 

generation power factor controllers tell the PFC status

without going to near the devices.

PFC: Power Factor Controller

 Remote Monitoring

ENTBUS PRO Software

   Requirment for the Energy Monitoring

Shopping Malls & Chain Markets

  a. Improving the energy quality and efficiency

  b. Power Factor Correction Monitoring

  c. SMS and E-mail notification for control and maintenance application

  d. Real time monitoring, with the visual reports easy analysis can be done

  e. Detecting the in which time interval energy consumption

  f. Accessing the data's on the Internet without going to the field

  g. Calculating the current system’s capacity for new investments

  h. Assigning authorization to different users and different roles for the Energy Management.

  i.  Right time period for the 3 time electricity meters Energy consumption

Commercial Buildings, Universities,

Hospitals

Industry

Electricity Distribution Firms,

Industrial Areas

  a. SMS, E-mail Alarm notification

  b. Reporting the data’s for analysis, graphic display and excel convert

  c. Virtual machine and parameter setting

  d. Monitoring pulse converters and reporting consumptions

  e. Real time data collecting and monitoring

  f. Accessing through internet

  g. Compatible system design with different brands Modbus devices

  h. Form type (invoice) reports

  i.  Detailed filters for the reports

  j. Remote configurations for the measurement devices.

  k. Multi Language

Realtime Monitoring

Reartime Data Display

Reatime Trend Display

Report Management (Examples)

Energy & Penalty Display

Active (kWh), Reactive (CapVarh, IndVarh), Penalty (Varh C/kWh, Varh L/kWh)

Active & Reactive Power Reatime Trend Display

Reactive Power Penalty Display

   IndPenalty (Varh L/kWh), CapPenalty (Varh C/kWh)

Certified by

WORKSHOP: 181 Upper Harbour Drive, Greenhite, Auckland

POST: 2/49 Seaton Road, Murrays Bay, Auckland 0630

Emergency Service: 24/7 Monday-Sunday

PHONE: 0800 256 221 / 09 476 9364

MOBILE: Paul 021 550 133

Email: westech@westech.co.nz